FAG 54210 thrust ball bearings

Weight / Kilogram:0.121; Nlim (grease):8,000 rpm; Internal Special Features:No; Inch - Metric:Metric; Enclosure Type:Contact Seal; Brand:NTN; d:25 mm; Outer Race Width:0.591 Inch | 15 Mill; Long Description:25MM Bore; 52MM Outs; Maximum Capacity / Filling Slot:No;

G:M6x1; L1:40 mm; H:53.9 mm; s1:20.6 mm; Dz:95 mm; C0:20.8 kN; d:45 mm; T max.:200 °C; Designation of bearing:US209G2T20; A1:33 mm;

C:43.55 kN; E:25 mm; Weight:3.1 kg; A1:33 mm; G:M6x1; J:104 mm; Z:26.8 mm; A:66 mm; N:M16; Recommended tightening torque for set screw:8 Nm;

C:25.7 kN; A1:12.5 mm; B:42.9 mm; N:14mm; T max.:100 °C; A2:45.4 mm; G:R1/8"; Designation of bearing:UC207-22G2; Weight:1.18 kg; J:130 mm;

C0:76.8 kN; e:21 mm; B:74.6 mm; C:113.36 kN; T max.:100 °C; A1:25 mm; N:25mm; A2:83.7 mm; A4:48 mm; Weight:13.44 kg;

C0:11.2 kN; P:150 mm; Weight:1.3 kg; A5:18.2 mm; C:19.5 kN; T max.:100 °C; T min.:-20 °C; H2:56 mm; S:18.2 mm; L:113 mm;

A4:26 mm; A1:9 mm; G:M6x1; e:11 mm; s1:21.45 mm; N:14mm; d:33.34 mm; A2:36.4 mm; A:34 mm; Z:30.1 mm;

Fillet Radius ra:0.64 mm; B:11.00 mm; Grease Speed Rating n1:19000 rpm; Accessories:Without Accessories; Sealed Speed Rating n3:13000 rpm; d:15.000 mm; Oil Speed Rating Open/Shielded n2:24000 rpm; D:35.0000 mm; Basic Dynamic Radial Load Rating C:7800 N; Oil Speed Rating n2:24000 rpm;

Z:52.3 mm; Designation of closed end cover:SCC206; L1:25 mm; H1:17 mm; B:38.1 mm; Weight:1.11 kg; Dz:70 mm; H2:83 mm; G:M6x1; A1:25 mm;

T min.:-20 °C; S:21.4 mm; A:25 mm; Designation of housing:FCE209-; A1:12 mm; G:M6x1; Recommended tightening torque for set screw:8 Nm; C0:20.8 kN; s1:39.7 mm; C:31.85 kN;

C0:29.2 kN; SW:4.76 mm; d:53.98 mm; D:100 mm; C:25 mm; C1:7.2 mm; T min.:-20 °C; Weight:1.17 kg; T max.:200 °C; r:1.1;

d1:58 mm; T min.:-20 °C; B1:56.3 mm; G:M8x1; C0:18.2 kN; C:21 mm; D:80 mm; Weight:0.74 kg; Recommended tightening torque for set screw:11.5 Nm; SW:4 mm;

f0:16.29; Mass:0.44 kg; D1:88.2 mm; Axial rigidity:284 N/µm; Characteristic inner ring frequency, BPFI:12.7 Hz; Da max:93 mm; Precision class:P4; Nlim (oil):19,500 rpm; D:100 mm; D2:92.82 mm;

Min operating temperature, Tmin:-20 °C; E:81.5 mm; da min:56.5 mm; Mass (without HJ ring):0.51 kg; Weight / Kilogram:0.484; Radial clearance class:C3; Dynamic load, C:66 kN; Fatigue limit load, Cu:8.8 kN; Category:Bearings; Characteristic outer ring frequency, BPF0:6.75 Hz;

C:52.5 kN; Weight:1.2 kg; B1:49.3 mm; Designation of bearing:ES212G2; Recommended tightening torque for set screw:22 Nm; s1:39 mm; SW:5 mm; P:300 mm; T min.:-20 °C; S:12 mm;